T-REX 300X DOMINATOR Super Combo - RTF

lign''s latest development, the T-REX 300X DOMINATOR is fully assembled from the factory and comes with the Align A10 10-channel remote control and the Align MiniGRS stabilization system.

T-REX 300X, small but mighty. It features a DFC rotor head assembly with a low center of gravity and low wind resistance for extremely direct flight control. The carbon fiber main frame is made of composite material and features a reinforcement plate and strut assembly, which effectively improve structural intensity and torsional strength. Its slim design provides a significantly strengthened mechanical structure. The battery mount and top-mount motor with bright red anodized finish give this model a nice look. The reinforced aluminum tail boom ensures the best torsional strength and extends the service life of the tail rotor mechanics. The progressive lightweight construction makes this model the reference model in this class.text by fw

It is equipped with the Align MiniGRS flybarless system which was developed by Align for helis up to the 500 class. The standard high torque and high efficiency of the brushless 300MX motor (3700KV / 2216) not only contribute to a dramatic increase in performance; It enables constant power output and stable RPM in non-stop 3D flight. The highly efficient cooling system creates a lower operating temperature during and after flight compared to the previous generation engine. The built-in Align DS450 and DS455 servos support operation up to 8.4V for the fastest response and highest torque. The output voltage of the BEC integrated in the 25A brushless controller can be adjusted from 5.0V to 8.4V.

The T-REX 300X may be tiny, but it combines all the flight characteristics of larger and smaller helis, so that it can perform well not only indoors but also in 3D flights outdoors. So that you always have fun flying, this model offers you the best performance values ??at a bargain price. It is lightweight and suitable for most pilots and beginners with simple and quick adjustments. text by fw


Technical data T-REX 300X
Length: 476mm
Height: 158mm
Width: 88mm
Main rotor blade length: 230mm
Main rotor diameter: 525mm Tail rotor
diameter: 143mm
Motor pinion: 14T
Main gear: 115T
Main pulley: 40T
Tail rotor gear: 13T Gear
ratio: 8.21:1:3.08
Weight (without battery): 418g

Technical data A10 Remote Control
Channels: 10
Flight Programs: Helicopter / Fixed Wing / Multicopter
Frequency Range: 2.408 ~ 2.475 GHz
Power: no higher than 20dBm (for EU)
Modulation: AFHDS 2A
Operating Voltage: 4.0V ~ 6.0V DC
Range: in the air without obstacles < 1000M
Low voltage warning : at less than 4.2V
Dimensions: 275x187x102mm
Weight: 485g (without battery)

Technical data MiniA.BUS receiver
Channels: 14 channels
Sensitivity: -105dBm
Frequency range: 2.4055 ~ 2.475 GHz
Modulation: AFHDS 2A
Operating voltage: 4.0V ~ 8.4V DC
Range: in the air without obstacles <150M

Technical data MiniGRS Flybarless System
Operating Voltage: DC 3.5~8.4V
Current Consumption: <100ma 4="" 8v="" br="">Rotation Rate: ±300°/sec
Tail Rotor Yaw Rate: ±600°/sec
Sensor Resolution: 12 Bit
Swashplate Support: 120° CCPM
Modes: T-REX 250, T- REX 300, T-REX 450, T-REX 470, T-REX 500
Supported Receivers: ALIGN A.BUS, Futaba S-FHSS S.BUS, Spektrum DSM2/DSMX Satellites
Operating Temperature: -20? ~ +65?
Humidity: 0 % ~ 95%
Dimensions: 37.6x22.4x13mm

Technical data RCC-3X Charger
Input: AC 100V~240V (50/60Hz)
Output: 2S 7.4V / 3S 11.1V
Supported Battery Types: Li-Polymer / Li-ion
Charging Method: CC/CV
Charging Current: 2A
Dimensions: 123x74.3x32mm
Weight: 260g

Technical data Battery
Voltage: 11.1V
Capacity: 1150mAh
Watt hours: 14.4Wh
Discharge rate: 30C
Charge rate: up to 5C
Dimensions: 74x36.5x21mm
Weight: 115g


scope of delivery
• 1x T-REX 300X DOMINATOR Kit
• 1x MiniGRS Flybarless System
• 2x 230 carbon main rotor blade
• 2x 50 tail rotor blade
• 1x RCE-BL25A 25A brushless controller
• 1x 300MX brushless motor (3700KV/2216)
• 3x DS450 digital servo
• 1x DS455 digital servo
• 1x A10 remote control
• 1x Mini A.BUS receiver
• 1x RCC-3SX charger
• 1x flight battery LiPo 3S1P 11.1V 1150mAh 30C
€ 416.42without VAT
plus shipping
Article in stock
delivery time approx. 1 to 3 days*
item number
RH30E01X
Manufacturer
align
Manufacturer no.
RH30E01XT
pack weight 2.1kg
EAN 4713413716210
Crowd
1
Add to Cart
On the notepad
Or finance from as little as 13.34 euros per month
over 36 months
Availability in my branch
Select branch
recommend article