SAVÖX SB-2292SG SERVO

High-voltage digital servo up to 8.4V
Up to 35% more power, 50kg*cm at 8.4V!
Brushless motor integrated in the housing
Full metal housing, extremely fast - 0.055s/60° at 8.4V
3 ball bearings, patented design

DESCRIPTION
WHAT DOES HV MEAN AT SAVÖX?

HV stands for high voltage. Savöx servos marked in this way can be operated with a voltage of up to 8.4V . The use of a 2s LiPo battery is possible without any problems. All HV servos can of course also be operated with a lower voltage from 4.8V, but less power is available here.



With the new SB-2292SG servo from SAVOX, the Taiwanese manufacturer Savöx has achieved a revolution in servo technology. The patented design of this monster ensures up to 35% more power, with proven standard installation dimensions.

This was achieved by integrating the brushless motor directly into the all-aluminum housing. In addition to a thermal advantage, this opens up the possibility of installing a larger motor. In order to optimally transfer the enormous actuating forces, a third ball bearing was integrated into the gearbox. In direct comparison to our SB-2282SG, the actuating force has been increased from 23 kg to 36 kg. At the same time, the operating time was reduced from 0.075 s/60° to 0.070 s/60° (at 7.4V). The total weight of the two servos remains identical despite the additional power. A fully rubberized servo cable is also standard in this servo range. It protects the servo cable from damage, but is still flexible enough to be laid cleanly. The SB-2292SG is suitable for use in helicopters, RC cars and fixed-wing models. In the near future, the patented SB-229X series will be expanded to include additional servo types.

The torque of this monster leaves nothing to be desired, here are the technical details for 6, 7.4 and 8.4V

6V = 29kg*cm with a travel time of 0.084s/60°
7.4V = 36kg*cm with a travel time of 0, 07s/60°
8.4V = 50kg*cm with a positioning time of 0.55s/60°

Scope of delivery: Servo incl. servo lever and fastening screws
Areas of application: helicopters, airplanes, RC cars

CHARACTERISTICS
Operating time S2/60° (sec): 0.055
Operating time S1/60° (sec): 0.07
Width (mm): 20.2
Actuating force S1 (kg*cm): 36
Height (mm): 38.7
Length (mm): 40.3
Actuating force S2 (kg*cm): 50
Weight (g): 79
High-voltage capable up to 8.4V: Yes
Packaging: default
Recommended use: Helicopter, plane, car
Output teeth (number): 25
Ball bearings (number): 3
Voltage 1 (Volt): 7.4
Engine type: Brushless motor
Gear type: steel
Housing type: Full metal
Voltage 2 (Volts): 8.4
Classification: default