Everships Satin Filler. 100ml container Colorless varnish
Apply Everships varnish on surfaces free of dust and moisture. Remove before application. Easy to apply and dries completely in 24 hours. The ideal application conditions are between 12ºC and 25ºC in a dry environment, with low humidity and protected from drafts and solar radiation. Use a flat trowel or mini-roller so that you do not leave any type of marks, offering long strokes that do not overlap each other, follow the grain of the wood and make sure that the varnish remains spread evenly. You must wait for it to dry and then sand again, removing the dust to prevent defects or imperfections that are too noticeable with the varnish. Drying between coats for 3-4 hours. For a perfect finish, it is recommended to sand the surface perfectly before applying the first layer of filler, sand between layers and once the last layer is dry, proceed with 320 grit sandpaper, then applying DISMOER finishing varnish. Cleaning tools with water.

Colorless satin water-based varnish for wood, fast-drying transparent, which regulates the absorption of subsequent layers of varnish by covering the pore, easy to sand. Essential for quality finishes. It can be dyed with universal dyes. Yield: 5/7 m² depending on the support.