TOURING CAR "ATC3.4BL" 4WD BRUSHLESS RTR 1:10 EP
1:10 EP RC Touring Car "ATC3.4" Edition 3 - The new Hot Shot Performance

Description: a myth doesn't follow a line, a myth breaks rules. The third generation of the ATC BL has grown into a super sports car. The combination of sportiness, dynamism and efficiency makes the ATC3.4 special and an extraordinary performer.
With its 3S Ready heart, supported by the fiber-reinforced "lightweight" chassis, the ATC3.4 delivers highly addictive racetrack performance.
"E-Mobility-Power" made by Absima - because we have always been able to do it!

Highlights ATC3.4 Brushless Version:
+ 60 KM / H fast
Waterproof speed controller - 3S Lipo battery ready for use
All-wheel drive (4 WD)

Furnishing :

Fully assembled and equipped
All wheel drive
Incl. 2.4 GHz remote control
Waterproof brushless controller with T-plug battery connector
Water-resistant and powerful steering servo with 4 kg actuating force
3300 KV brushless motor of size 540
Fully encapsulated main drive - prevents the ingress of stones or other foreign bodies
Aluminum cardan drive with steel mounts
The vehicle is completely ball-bearing and therefore very smooth and durable
Two built-in cone differentials transfer the torque optimally and compensate for differences in speed, for example when cornering
Steel differential outputs
12mm aluminum oil pressure shock absorber adjustable via knurled screw
Aluminum motor mount
Steel shafts on the front axle
Tie rods adjustable via right / left thread
Chassis stiffeners made of aluminum
7mm shock towers V / H
Extremely robust body completely designed
The reinforced plastic parts are on the one hand very resistant and on the other hand provide the necessary degree of deformation to survive many an "accident" without damage
Metal main gear and motor pinion

Technical specifications :

Dimensions (L / W / H) 450 x 190 x 125 mm
Weight 1425 g
Wheelbase 260 mm
Ground clearance 20 mm
Front track 170 mm
Rear track 170 mm
Tires: Ø ± 65 mm / width 27 mm at the front - 27 mm at the rear
Chassis ATC
Viscosity damper oil: 300 v / h
Spring strength damper: medium
Damper installation length: front 62 mm / rear 62 mm
Viscosity differential oil: front 5,000 / rear 5,000
Internal gear ratio: bevel pinion 13T / crown wheel 38T
Motor ratio: main gear 64T / motor pinion 29T (module 0.6)

Technical data cruise control Thrust:

Waterproof 50A controller including fan
3S LiPo ready for use
T-Plug battery connector
Motor connection via 3.5mm gold contact plugs and sockets
Immediately ready to drive
Easy calibration
Sensorless
NiMH 4 - 9 cells & LiPo 2 - 3 cell operation
Overheating protection 95 °
Short-term load 300A
BEC 6V / 3A
Operating voltage 4.8 - 11.1V
Motor timing 18.75 deg.
Motor limit @ 2S LiPo / 6 cells NiMH Onroad <8T / Offroad <11T and Motorlimit @ 3S LiPo / 9 cells NiMH Onroad <11T / Offroad <14T
Directly via integr. The following functions can be programmed with the Set Up button:
+ Brake power 25% - 100%
+ Neutral brake 0% - 40%
+ Driving mode forward - brake - reverse or forward - brake
+ Start punch from soft to aggressive
+ Voltage cut-off from without to 3.4V (ex works LiPo cut-off 3.0V / cell)
Dimensions (L / W / H): 48.5 x 38 x 32 mm
Weight including cable: 90 g
Technical data Motor Thrust:

3300 KV
27,400 rpm @ 7.4 volts
4 poles
Operating voltage 4.8 - 11.1V
Size 540
Case length: 52.0 mm
Case Ø: 36.0 mm
Shaft length: 14.5 mm
Shaft diameter: 3.17 mm
Weight: 200 g

Technical data Servo S40PH:

Size - car standard
Positioning force 4.0 Kg @ 4.8V
Positioning time 0.16 sec / 60 ° @ 4.8V
Gear - nylon
Ring gear - 25 teeth
Connector system - JR
Dimensions (LxWxH) 40.2 mm x 20.4 mm x 39.8 mm
Mounting hole spacing - 49.7 mm
Voltage - 4.8 - 6.6V
Weight - 43 g
1 ball bearing