JP Hobby ER-200 15mm Alloy Electric Retracts Set (30kg/Low/Outside) + Controller (optional)
JP Hobby ER-200 15mm Alloy Electric Retracts Set (30kg/Low/Outside) Controller (optional)
JP Hobby ER-200 Alloy Electric Retracts Set (3 retracts) (Outside) + Sequencer (optional) for models up to 30kg
These 3 electric allow retracts work for planes up to 30kg equiped with JP Hobby oleo struts ER-200 or equivalent 15mm. The set of retracts is delivered with your choice of sequencer control module (optional).
Specifications
Material: Aluminium
For plane: up to 30kg
Technical Specifications
Struts diameter: 15mm
Retracts weight: 702g
Control module box weight (option): 19g
Retracts sizes: nc
Retracts mounting plate sizes: nc
Control box sizes (option): 53mm x 32mm x 10mm
Working Voltage: 7.4-8.4V
Speed: 5.0 sec (8.4V) - 7.0 sec (6V)
Contents
3x Retract JP Hobby ER-200 units (30kg/Low/Outside)
Requires
JP Hobby sequencer (option to be selected on this page). Please pay attention that only JP Hobby sequencers are qualify to work in accordance of the JP Hobby products.
2 cells Battery (when used with an HV sequencer - recommended)
On-board accessory DURAL LANDING GEAR 72 x 238 x 67mm GreatPlanes
ER-200 Alloy Electric Retract Motor Part Skymaster M4 (60mm shaft)
JP Hobby Multifunctional Testing Bench for Turbines / EDF / Motors / Propeller
JP Hobby Multifunction Landing Gears and Doors Sequencer V1/V2 for ER-05/08/10/120/150/200/280
On-board accessory DURAL LANDING GEAR 64 x 190 x 61mm GreatPlanes
On-board accessory MECHANICAL REAR RETURN EARTH 7.5 to 12.5cc Robart
JP Hobby ER-200 15mm Alloy Electric Retracts Set (30kg/Low/Outside) + Controller (optional)
