SAVÖX SV-1280SG SERVO
High-end 32-bit servo with soft start in a full aluminum housing with 3x ball bearings
Extremely powerful, extremely hard in the zero position, reduced operating noise with maximum reliability
High-voltage digital servo 4.8-8.4V, operated on 2s LiPo
Dimensions (L/W/H): 40.3 x 20.2 x 38.2 mm Weight: 76 grams
0.14/0.12 sec/60 degrees and 45/55 kg*cm at 7.4/8.4 volts

DESCRIPTION
The SV-1280SG was created in close collaboration with Savöx's experienced development team and the best pilots in Europe. It is state-of-the-art to offer the maximum performance with the highest reliability and precision.

The result after months of development, testing and joint work both in the laboratory, on the test bench and also in real operation for almost 100 hours of operation makes the SV-1280SG a new milestone in servo technology.

The all-aluminum housing ensures the necessary robustness and longevity and gives the SV-1280SG a high-quality and timeless look. The housing contains the latest motor technology on the market, including a completely newly developed 32-bit mainboard. This ensures unprecedented resolution and precision, which is clearly noticeable during operation. The positioning force of up to 55kg*cm at 8.4V with a positioning time of 0.12 seconds / 60° leaves little to be desired and implements every control command directly.

Particular attention was paid to the holding force around the zero position, here too the SV-1280SG sets new standards and can only be disturbed with brute force. Of course, the SV-1280SG also has a soft start, which slowly brings the servo to the desired zero position when switched on in order to protect the steering. The Sanwa SSR mode is interesting for RC car drivers, for whom the SV-1280SG is of course perfect!

In addition to the standard accessories, the scope of delivery also includes a high-quality aluminum lever, which is available as an accessory as SH-82.

The weight of the SV-1280SG is a real 76 grams including the complete cable.

The control frequency can be up to 333Hz, the center pulse is 1520us.
This means that the SV-1280SG is also suitable for use on modern gyros and stabilizer systems.

CHARACTERISTICS
Operating time S2/60° (sec): 0.12
Operating time S1/60° (sec): 0.14
Width (mm): 20.2
Height (mm): 38.2
Voltage range: 4.8V-8.4V
Length (mm): 40.3
Actuating force S1 (kg*cm): 45
Actuating force S2 (kg*cm): 55
Weight (g): 76
Control frequency: Control frequency up to 333Hz, center pulse 1520us
High-voltage capable up to 8.4V: Yes
Recommended use: Helicopter, plane, car, boat
Engine type: Bell armature motor
Output teeth (number): 25
Ball bearings (number): 3
Voltage 1 (Volt): 7.4
Gear type: steel
Housing type: Full metal
Voltage 2 (Volts): 8.4
Classification: default