Kavan Mini Servo Digital GO-10S41MG (0.075s/60°, 10.5kg.cm)
High torque and super high speed programmable digital mini servo 41g with a coreless motor, titanium gears and wide input voltage range (4.8-8.4V), 2xBB, ideal for ailerons and flaps of gliders and hotliners. Torque 6.0kg.cm, speed 0.100s/60° at 4.8V, torque 7.0kg.cm, speed 0.090s/60° at 6.0V, torque 9.0kg.cm, speed 0.080s/60° at 7.4V, torque 10.5kg.cm, speed 0.075s/60° at 8.4V. Aluminum servo case for perfect cooling under high load. Dimensions 35.5x15x29.2mm, weight 41g.


GO-10S41MG (0.075s/60°, 10.5kg.cm)

NewRecommended

Code KAV20.10S41MG
Retail €67.59
Price €39.67
Discount 29%
In stock OK
Order
1
Brand CAFE
Barcode / EAN 8596450068100
Add to Favourites
High torque and super high speed programmable digital mini servo 41g with a coreless motor, titanium gears and wide input voltage range (4.8-8.4V), 2xBB, ideal for ailerons and flaps of gliders and hotliners. Torque 6.0kg.cm, speed 0.100s/60° at 4.8V, torque 7.0kg.cm, speed 0.090s/60° at 6.0V, torque 9.0kg.cm, speed 0.080s/60° at 7.4V, torque 10.5kg.cm, speed 0.075s/60° at 8.4V. Aluminum servo case for perfect cooling under high load. Dimensions 35.5x15x29.2mm, weight 41g.
High torque and super high speed programmable digital mini servo with a coreless motor, titanium gear and double BB-ed output shaft for ailerons and flaps of gliders and hotliners. etc. All-aluminium servo case for perfect cooling under high load.

GO-10S41MG is programmable using the KAVAN GO servo USB programmer/interface and PC software.

Programmable Functions

Servo Angle: Maximal servo rotation angle range setting. The default range is ca 120° within the regular RC signal pulse width range (900~2100 µs); ca 180° within the max. signal pulse width range (500~2500 µs).
Servo Neutral: Servo neutral (centre) position setting.
Damping Factor: Servo damping setting – adjust the characteristics of the servo when stopping.
PWM Power: Adjusts the servo output power. The higher the power, the higher the speed and torque of the servo – indeed also the current consumption will be higher.
Sensitivity: Servo sensitivity (Dead Band) setting. The higher sensitivity the narrower the dead band – servo moves only if the change of the signal pulse width is bigger than the dead band width. Too high setting may cause servo jitter in some applications. Range: Ultra High (ca 1 µs dead band) – High (ca 2 µs) – Medium (ca 3 µs) – Low (ca 4 µs)
Soft Start: Turns on/off the soft start feature. If ON, the servo goes slowly to the initial position corresponding to the servo signal once the power is switched on.
Reverse: Reverses the servo movement direction.
Narrow Band: FUTABA SR Mode – only for use with FUTABA radio channels working in the SR mode. Do not turn the option on if you are using a different setting of your FUTABA radio or any other radio.
SANWA SSR: SANWA SSR Mode - only for use with SANWA radio channels working in the SSR mode. Do not turn the option on if you are using a different setting of your SANWA radio or any other radio.
Lost PPM Protection (Fail-Safe): In the case the control signal from the receiver is lost completely or cannot be decoded correctly (due to interference) the servo can use choose one of three fail-safe modes:
(a) Release: No fail-safe protection.
(b) Keep Position: Keeps the position corresponding to the last correct control signal.
(c) Go Neutral Position: The servo returns to the neutral (1500 µs pulse width) position.
Over Load protection: Enables or disables overload protection of the servo in three levels – once the overload conditions last for the pre-set time (in seconds), the output power of the servo is reduced to the corresponding pre-set level (% of the max. power).
Default: Restores the factory default setting of the connected servo.
Wide input voltage range 4.8-7.4 V (nominal).

5.92 mm/25T output shaft.